cistern valve spigots
The Wendy House toilet has a high wall-mounted cistern. Fabulous water pressure flushes the toilet with a gravity induced whoooooosh.
But the cistern has always filled slowly with a noisy trickle of water. The whole arrangement is reminiscent of Victorian school washrooms. While waiting 15 minutes for the cistern to fill is not a problem when I am alone, for guests it introduces a timing problem at peak use times.
With an imminent Wendy House party, home improvements are on the menu. Replacing the limescale clogged cistern valve. Yay. No problem. Or so I thought. A quick trip to the DIY shop where the sales assistant didn’t even know what a valve that controls the waterflow into the tank above the toilet was. Sigh. I picked the valve that looked most like the one already installed and toddled off home. So far so good. I switched off the water supply to the house then climbed on a tall bar stool to reach the cistern, remove the lid and start trying to unscrew the current valve.
Things started going wrong. A bit of the old valve broke off in my hand. A close inspection of the instructions for the new valve revealed that despite diagrams I could now work out what this meant
fit ballvalve using backnut(s) provided and ensure that the spigot(s) are used to centralise the tail of the hose
The backnut, spigots, tail nor hose were labelled in any of the 4 diagrams. Quickly I resoted to visual matching, make the new one look like the old one currently looks (without the limescale or broken bit). Then I realised that I would probably have to take part of the wall away to access the pipes.
The doorbell rang
Hello I’m Rob White and I’m canvassing for the Green party in May’s election. Can I ask you if you know whether you are going to vote in the election
I can ask you, you know if you’re going to vote, or you are going to vote?
errr… ..um, I am going to vote
Are you going to vote for the Green party?
Valve in hand, I look at the two young perky faced boys on my doorstep
Have either of you ever changed a cistern valve?
Oh no, that’s very complicated, I’d call a plumber, you’re a brave person
They start backing away slowly as if I’m holding a loaded weapon. I’ve replaced cistern valves before. Normally its a couple of minutes, an easy job. Their lack of willingness and skill is a tad disappointing. I reassure them about my vote and non-violent intentions then call Kevin.
Wonderful Kevin sorts out my cistern with Canadian calm
Cistern refill time has sucessfully been upgraded from a 15 minute trickle to a 30 second flow. Result! Almost grounds for a proposal.